| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Produktas | FP7 High-speed Counter Units |
| Dalies numeris | AFP7HSC4T |
| Produkto pavadinimas | FP7 High-speed Counter |
| Produkto numeris | AFP7HSC4T |
| Įvestis: Izoliacijos metodas | Photocoupler insulation |
| Įvestis: Nominali įėjimo įtampa | 12 to 24 V DC / 3.5 to 5 V DC |
| Skaičiavimo funkcija: skaitiklio tipas | Linear counter / Ring counter |
| Skaičiavimo funkcija: išorinė įvestis/išvestis | Control signal input: 8 points (2 points/ch), External output: 8 points (2 points/ch) |
| Skaičiavimo funkcija: įvesties signalas | Phases A, B and Z |
| Įvestis: Įėjimo varža: 5 V nuolatinė srovė | 390 Ohm (5 V DC) approx. |
| Skaičiavimo funkcija: skaičiavimo diapazonas | Signed 32-bit (-2,147,483,648 to +2,147,483,647) |
| Įvestis: Įvesties varža: 24 V nuolatinė srovė | 3.0 kOhm approx. |
| Skaičiavimo funkcija: skaitiklių skaičius | 4ch |
| Įvestis: Naudojimo įtampos diapazonas: 5 V nuolatinė srovė | 3.5 to 5.25 V DC |
| Kitos funkcijos: fiksavimo funkcija | Acquires the current count value from the edges of input signals, and stores it in the capture 0 register or capture 1 register. The value of the specified capture register will be overwritten by a new value and the old value will be discarded every time a counter value is captured. |
| Skaičiavimo funkcija: skaitiklio įvesties tipas | Individual input (Phases A and B): 1 multiple, 2-multipleDirection discrimination input: 1 multiple, 2-multiple2-phase input: 1 multiple, 2-multiple, 4-multiple |
| Įvestis: Įvesties laiko konstantos nustatymas | None, 0.1 micro s, 0.2 micro s, 0.5 micro s, 1.0 micro s, 2.0 micro s and 10.0 micro s |
| Įvestis: Naudojimo įtampos diapazonas: 24 V nuolatinė srovė | 10.8 to 26.4 V DC |
| Skaičiavimo funkcija: maksimalus įėjimo dažnis | 4 MHz / 8 MHz for individual input (phases A and B) (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz for direction discrimination input (Duty ratio 50 plus or minus 10 %), 4 MHz / 8 MHz /16 MHz for 2-phase input (Duty ratio 50 plus or minus 10 %, Phase shifting below 5 %) |
| Kitos funkcijos: Įvesties pertraukimo funkcija | Available (2 points/ch, Max. 8 points/unit)(Note) The interrupt input function can be used for 8 points per unit and for a maximum of 8 units (max. 64 points) in the whole system. However, the entire scan time slows down as more interrupt programs are used. Minimize the use of interrupt programs.(Note) The priority order for interrupt inputs is as follows; In a unit, from the smallest interrupt bit. In the whole system, from the smallest unit number. |
| Įvestis: minimali įjungimo įtampa / minimali įjungimo srovė: 5 V nuolatinė srovė | 3.0 V DC / 4 mA |
| Palyginimo funkcija: tikslinės vertės atitikimo funkcija | Depending on the count direction, sets or resets the output when the counter value reaches the target value. |
| Įvestis: minimali įjungimo įtampa / minimali įjungimo srovė: 24 V nuolatinė srovė | 10 V DC / 4 mA |
| Įvestis: maks. IŠJUNGIMO įtampa / maks. IŠJUNGIMO srovė: 5 V nuolatinė srovė | 1.0 V DC / 0.5 mA |
| Išorinė išvestis: palyginimo rezultato išvesties funkcija | Outputs the result of comparison function. |
| Įvestis: maks. IŠJUNGIMO įtampa / maks. IŠJUNGIMO srovė: 24 V nuolatinė srovė | 2.0 V DC / 2 mA |
| Matavimo funkcija: Dažnio matavimo funkcija | Measures the intervals between the variations of count values, and calculates the frequency. |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas