| Parametras | Vertė |
|---|---|
| Fiber amplifierconnector | |
| Prekė | Functions |
| Forma | Type |
| Funkcijos | Power tuning |
| Iš anksto sujungtas | AND/OR output |
| NPN išvestis | PNP output |
| Įvesties / išvesties nustatymai | Output setting (select from channel 2 output, AND, OR, leading edge sync, falling edge sync, or differential output) |
| Reakcijos laikas | Super-high-speed mode |
| Standartinis režimas | 1 ms for operation and reset respectively |
| Laikmačio funkcija | Select from OFF-delay, ON-delay, or one-shot timer.1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments,200 ms to 1 s set in 100-ms increments, and 1 to 5 s set in 1 s-increments) |
| Skaitmeniniai ekranai | Select from the following: Incident level for channel 1 + incident level for channel 2, Incident level + threshold, incident level percentage + threshold, incident light peak level + no incident light bottom level, minimum incident light peak level + maximum no incident light bottom level, long bar display, incident level + peak hold, incident level + channel |
| Apsauginės grandinės | Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention |
| Jautrumo nustatymas | Teaching and digital up/down keys |
| Apsaugos laipsnis | IEC 60529 IP50 (with protective cover attached) |
| Didelės raiškos režimas | 4 ms for operation and reset respectively |
| Maitinimo įtampa | 12 to 24 VDC±10%, ripple (p-p) 10% max. |
| Šviesolaidinio stiprintuvo jungtis1 | AND/OR output |
| Šviesos šaltinis (bangos ilgis) | Red LED (650 nm) |
| 30 cm PVC kabelis su M8 kištuku (4 kontaktų) | E3X-CN21-M3J-2 0.3M |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas