| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Išvestis | NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 26.4 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) |
| Išsami informacija | Thru-beam type |
| Produktas | Amplifier Built-in Ultra-compact Laser Sensor |
| Medžiaga | Enclosure: Polybutylene terephthalate, Front cover: Acylic, Lens: Glass, Indicator part: Polyarylate |
| Priedas | MS-EXL2-2 (Mounting plate): 2 pcs. |
| Apsauga | IP67 (IEC) |
| Dalies numeris | EX-L211-J |
| Produkto pavadinimas | Amplifier Built-in Ultra-compact Laser Sensor EX-L200 |
| Pakartojamumas | Perpendicular to sensing axis: 0.05 mm0.0020 inor less |
| Reakcijos laikas | 0.5 ms or less |
| Jutimo diapazonas | 1 m3.281 ft |
| Produkto numeris | EX-L211-J |
| Jutimo objektas | Opaque object of ø2 mmø0.079 inor more |
| Maitinimo įtampa | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Maitinimo indikatorius | Green LED (lights up when the power is ON) (incorporated on the emitter) |
| Aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Spinduliuojantis elementas | Red semiconductor laser Class 1 (IEC / JIS/ FDA) (Note:This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH(Center for Devices and Radiological Health) under the FDA (Food and Drug Administration)(Maximum output: 390 μW, Peak emission wavelength: 655 nm0.026 mil) |
| Atsparumas smūgiams | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Aplinkos apšvietimas | Incandescent light: 3,000 lx or less at the light-receiving face |
| Aplinkos temperatūra | -10 to +55 ℃+14 to +131 ℉(No dew condensation or no icing condition),Storage: -30 to +70 ℃-22 to +158 ℉ |
| Srovės suvartojimas | Emitter: 10 mA or lessReceiver: 10 mA or less |
| Veikimo indikatorius | Orange LED (lights up when the output is ON) (incorporated on the receiver for thru-beam type) |
| Stabilumo indikatorius | Green LED (lights up under stable light received condition or stable dark condition) (incorporated on the receiver for thru-beam type) |
| Jautrumo reguliatorius | Continuously variable adjuster (incorporated on the receiver) |
| Atsparumas vibracijai | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude (10 G max.) in X, Y and Z directions for two hours each |
| Izoliacijos varža | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Išvestis: išvesties operacija | Light-ON / Dark-ON selectable by the output operation switching input |
| Įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Emisijos taško dydis (tipinis) | Approx. 6 × 4 mm0.236 × 0.157 in(vertical × horizontal)(at a sensing distance of 1 m) |
| Atitiktis CE ženklinimo direktyvai | EMC Directive, RoHS Directive |
| Išėjimas: Apsauga nuo trumpojo jungimo | Incorporated (short-circuit protection / inverse polarity protection) |
| Minimalus aptinkamas objektas (tipinis) | Opaque object of ø0.3 mmø0.012 in(Note)Typical values when the sensitivity adjuster is optimally adjusted. |
| Pakartojamumas (tipinis) (statmenai jutimo ašiai) | 0.01 mm0.0004 inor less(all area)(Note)Typical values when the sensitivity adjuster is optimally adjusted. |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas