| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Kabelis | 0.1 mm23-core (emitter: 2-core) cabtyre cable, 2 m6.562 ftlongNote:The bending-resistant cable type has a 0.1 mm23-core (thru-beam type emitter: 2-core) bending-resistant cabtyre cable, 2 m6.562 ftlong. |
| Išvestis | NPN open-collector transistor- Maximum sink current: 20 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1.5 V or less (at 20 mA sink current) |
| Pastaba | Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃73 ℉. |
| Svoris | Net weight (each emitter and receiver) : 15 g approx.Gross weight: 35 g approx. |
| Išsami informacija | Thru-beam [Front sensing] |
| Produktas | Ultra-minute Photoelectric Sensor |
| Medžiaga | Enclosure: PBTLens: PolycarbonateMetallic part: Stainless steel (SUS304)(SUS301 for rear side of front sensing type) |
| Priedas | M2 mounting screws: 1 set (front sensing type: 6 mm0.236 inin length; side sensing type: 10 mm0.394 inin length) |
| Įžeminimas | Floating |
| Apsauga | IP67 (IEC) |
| Dalies numeris | EX-Z11FB-R |
| Produkto pavadinimas | Ultra-minute Photoelectric Sensor EX-Z |
| Reakcijos laikas | 0.5 ms or less |
| Jutimo diapazonas | 50 mm1.969 in |
| Produkto numeris | EX-Z11FB-R |
| Maitinimo įtampa | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Kabelio prailginimas | Extension up to total 50 m164 ftis possible with 0.3 mm2, or more, cable (both emitter and receiver) . |
| Aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Spinduliuojantis elementas | Red LED (Peak emission wavelength: 650 nm0.026 mil, modulated) |
| Išvesties operacija | Dark-ON |
| Atsparumas smūgiams | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions for three times each |
| Aplinkos apšvietimas | Incandescent light: 5,000 ℓx at the light-receiving face |
| Aplinkos temperatūra | -10 to +55 ℃14 to +131 ℉(No dew condensation or icing allowed), Storage: -30 to +70 ℃-22 to +158 ℉ |
| Srovės suvartojimas | Emitter: 10 mA or lessReceiver: 10 mA or less |
| Minimalus jutimo objektas | ø0.3 mmø0.012 inopaque object (Completely beam interrupted object)(Setting distance between emitter and receiver: 50 mm1.969 in) |
| Veikimo indikatorius | Orange LED (Lights up when the sensing output is ON) |
| Stabilumo indikatorius | Green LED (Lights up under the stable light received condition or the stable dark condition) |
| Atsparumas vibracijai | 10 to 500 Hz frequency, 3 mm0.118 inamplitude in X, Y and Z directions for two hours each |
| Izoliacijos varža | 20 MΩ or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Atitiktis CE ženklinimo direktyvai | EMC Directive, RoHS Directive |
| Išėjimas: Apsauga nuo trumpojo jungimo | Incorporated |
| Pakartojamumas (statmenai jutimo ašiai) | 0.02 mm0.001 inor less |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas