Sandėlyje Karštas produktas
HC-K 6/12-ESTS
HC-K 6/12-ESTS 1636350 PHOENIX CONTACT Contact insert
$114.79
JAV dolerių
128 sandėlyje
Pagrindinės specifikacijos
:
Note regarding axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use.The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque.
Tipas:
B16
Plotis:
34 mm
Ūgis:
47.2 mm
Tiekėjo informacija
Produktai: 0
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Note regarding axial connection technology:Only for stranded wires. The specified conductor cross sections refer to the geometric cross section of the cable used.Cables with a geometric cross section which deviates significantly from the nominal cable cross section must be checked before use.The axial connection technology connection space is designed for fine strand cables according to VDE 0295 Class 5. Deviating cable structures (e.g., Class 6 cables) must be checked before use.Assembly instructionsBefore assembly, ensure that the tapered screw is fully loosened (chamber is open). Cables must not be twisted. The wires must be pushed into the contact chamber as far as they will go (until the insulation touches the contact). Hold the wires in position and tighten using an Allen key. The used wire end must be cut off before reconnection. The terminal screw must only be retightened once to prevent the litz wires from breaking. To prevent damage to the contact, the wire/cable must be mechanically held at an appropriate distance from the connection point (e.g., when used in a plate cut out). For notes on correct execution, see DIN VDE 0100-520:2003-06. Unused connections must be tightened with maximum torque. | |
| Tipas | B16 |
| Plotis | 34 mm |
| Ūgis | 47.2 mm |
| Ilgis | 84.5 mm |
| Serija | HC-K |
| Bendra | For HEAVYCON ADVANCE and HEAVYCON housing of type B16/B32, axial connection for 2 mm Allen wrench |
| Paraiška | Power/signal |
| Produkto tipas | Contact insert with a fixed no. of positions |
| Surinkimo pastaba | To ensure correct use, installation in housing with IP54 protection or better is required |
| Nominali srovė | 40 A (power contacts) |
| Straipsnio peržiūra | 04 |
| Kontaktinis skersmuo | 4 mm |
| Kontaktinė medžiaga | Cu alloy |
| Kontaktinis numeris | 1 - 6 (power contacts) |
| Atsuktuvo ašmenys | 0.5 x 3.5 mm (control contacts) |
| Priveržimo sukimo momentas | 2 Nm ... 2.5 Nm (PE connection) |
| Ryšio profilis | 6+12+PE |
| Taršos laipsnis | 3 |
| Matmenų brėžinys | |
| Pozicijų skaičius | 18 |
| Nominali viršįtampis | 8 kV (power contacts) |
| Viršįtampio kategorija | III |
| Ryšio technologija | Axial screw connection (power contacts) |
| Kontaktinės medžiagos tipas | turned |
| Maitinimo kontaktų skaičius | 6 |
| Nominali įtampa (III/3) | 690 V |
| Laidininko skerspjūvis | 2.5 mm² ... 10 mm² (power contacts) |
| Valdymo kontaktų skaičius | 12 |
| Kontaktinio nešiklio medžiaga | PC |
| Įdėjimo / ištraukimo ciklai | ≥ 500 |
| Jungties skerspjūvis AWG | 12 ... 8 (power contacts) |
| Aplinkos temperatūra (darbinė) | -40 °C ... 125 °C |
| Gręžtos skylės atstumas, horizontalus | 77.5 mm |
| Nominali maitinimo kontaktų įtampa | 230/400 V |
| Degumo įvertinimas pagal UL 94 | V0 |
| Atskiro laido izoliacijos ilgis | 8 mm +1 mm (Power 6 mm² ... 10 mm²) |
| Kontaktinio paviršiaus medžiaga, maitinimo kontaktas | Ag |
| Kontaktinio paviršiaus medžiaga, valdymo kontaktas | Ag |
Produkto aprašymas
Contact insert, number of poles: 6+12+PE, size: B16, power contacts: 6, control contacts: 12, Male, Axial screw connection, 690 V, 40 A, 2.5 mm² ... 10 mm², application: Power/signal
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
