Sandėlyje Karštas produktas
HC-M-02-MOD-BU
HC-M-02-MOD-BU 1679359 PHOENIX CONTACT HEAVYCON contact insert module, female, 2-pos., axial screw connection
$0.00
JAV dolerių
4412 sandėlyje
Pagrindinės specifikacijos
:
Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly.
Plotis:
34.2 mm
Ūgis:
40.6 mm
Ilgis:
14.6 mm
Tiekėjo informacija
Produktai: 0
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Note regarding axial connection technology:Only for stranded wires. The conductor cross sections stated refer to the geometric cross section of the cable used.Use of cables with a geometric cross section very different from that of the cable's nominal cross section should be checked before use.The wiring space of the axial screw method is designed for fine strand cables according to VDE 0295 class 5. Deviating cable structures (e.g. class 6 cables) should be checked before use.ConnectionBefore starting to connect, ensure that the tapered screw is turned back all the way (chamber is open). The cables must not be twisted. The cores should be slid to the limit stop in the contact chamber (until insulation touches contact). Hold cores in position and use socket wrench to tighten. The used core end should be cut off before connecting again. The connection screw may only be retightened once to prevent the strands from breaking. To prevent damage to the contact, the core / cable should be mechanically intercepted at an appropriate distance from the connection point (e.g. by using a plate cutout). DIN VDE 0100-520:2003-06 contains information on how to do this correctly. | |
| Plotis | 34.2 mm |
| Ūgis | 40.6 mm |
| Ilgis | 14.6 mm |
| Serija | HC-M-02 |
| Bendra | For HEAVYCON housing type B6 to B48, HC-M-MHR... hinged retaining frame required |
| Paraiška | Power |
| Produkto tipas | Modular contact insert |
| Surinkimo pastaba | - Connection of the wires using a 2 mm Allen wrench.- Housing height ≥ 52 mm.- Axial screw connection only for flexible wires.- Plug-in connections may only be operated only when there is no load/voltage. |
| Nominali srovė | 40 A |
| Kontaktinė medžiaga | Copper alloy |
| Šešiakampis lizdas | SW 2 |
| Kontaktinis numeris | 1 - 2 |
| Priveržimo sukimo momentas | 1.5 Nm (2.5 mm² ... 4 mm²) |
| Ryšio profilis | 2 |
| Taršos laipsnis | 3 |
| Matmenų brėžinys | |
| Pozicijų skaičius | 2 |
| Nominali viršįtampis | 8 kV |
| Viršįtampio kategorija | III |
| Ryšio technologija | Axial screw connection |
| Nominali įtampa (III/3) | 1000 V |
| Modulių lizdų skaičius | 1 |
| Laidininko skerspjūvis | 2.5 mm² ... 8 mm² (The cross section specification refers to the geometric cross section of the cable used) |
| Kontaktinio nešiklio medžiaga | PC |
| Kontaktinio paviršiaus medžiaga | Ag |
| Įdėjimo / ištraukimo ciklai | ≥ 500 |
| Jungties skerspjūvis AWG | 12 ... 10 |
| Aplinkos temperatūra (darbinė) | -40 °C ... 125 °C |
| Prijungimas pagal standartą | IEC / EN |
| Degumo įvertinimas pagal UL 94 | V0 |
| Atskiro laido izoliacijos ilgis | 8 mm +1 mm (for 6 mm²) |
Produkto aprašymas
More details
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
