Sandėlyje Karštas produktas
HLC1CM
HLC1CM HL-C1C-M PANASONIC Driver for connecting 2 sensor heads HL-C1 series
$0.00
JAV dolerių
3584 sandėlyje
Pagrindinės specifikacijos
Prekė:
Specifications
Svoris:
Net weight: 300 g approx.
Išsami informacija:
Controller
Produktas:
Ultra High-speed Laser Displacement Sensor [CCD Style]
Tiekėjo informacija
PANASONIC
Produktai: 4316
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Svoris | Net weight: 300 g approx. |
| Išsami informacija | Controller |
| Produktas | Ultra High-speed Laser Displacement Sensor [CCD Style] |
| Priedas | - |
| Dalies numeris | HL-C1C-M |
| Aliarmo išvestis | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between alarm output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Kabelio ilgis | Power line: Less than 10 m 32.808 ftSignal line: Less than 30 m 98.425 ft |
| Produkto pavadinimas | Ultra High-speed Laser Displacement Sensor HL-C1(Discontinued) |
| Mėginių ėmimo dažnis | Selectable from 100 micro s / 144 micro s / 200 micro s / 255 micro s / 332 micro s / 498 micro s / 1,000 micro s |
| Laikymo funkcijos | Selectable from NORMAL / P-P / PEAK / VALLEY(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Produkto numeris | HL-C1C-M |
| Maitinimo įtampa | 24 V DC plus or minus 10 % including ripple 0.5 V (P-P) |
| Skaitmeniniai filtrai | High pass: OFF, 10 to 2,000 Hz (9 steps)Low pass: OFF, 10 to 2,000 Hz (9 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Indikatoriai: TAMSUS | Red LED (lights up upon disabled measurement due to insufficient light at sensor head 1 or 2) |
| Nulio nustatymas ĮJUNGTA įvestis | Zero set: ON when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Kalibravimas: diapazonas | 0.9000 to 1.1000(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Nulio nustatymo išjungimo įvestis | Zero set: OFF when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input |
| Kalibravimas: Pastūmimas | plus or minus 20.0000 mm plus or minus 0.787 in(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Srovės suvartojimas | When 1 sensor is connected: 430 mA approx.When 2 sensors are connected: 550 mA approx. |
| Indikatoriai: RYŠKŪS | Red LED (lights up upon disabled measurement due to excessive light at sensor head 1 or 2) |
| Skaičiavimo funkcijos | L plus or minus KA, L plus or minus KB, L plus or minus K (A plus or minus B)A, B: Sensor head 1, Sensor head 2 measurement values, L = plus or minus 999.9999, K = 0.0001 to 99.9999(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Nuoseklusis įvestis / išvestis | RS-232C |
| „Connectale“ jutiklio galvutė | Maximum 2 sensor heads |
| Analoginė išvestis: srovė | Output current: 4 to 20 mA/F.S. [default setting when diffuse reflective mode is selected (Note 2)]Output range: 0 to 29.5 mA (maximum of 25 mA at max. load impedance)Load impedance: 250 Ohm or less(Note 1) The maximum analog output current will vary with load impedance.(Note 2) If specular reflective mode is selected, then the default setting is 5.6 to 18.4 mA/F.S. |
| Analoginis išėjimas: Įtampa | Output voltage: plus or minus 5 V/F.S. [default setting when diffuse reflective mode is selected (Note) ]Output range: -10.9 to +10.9 VOutput current: Max. 2 mA, Output impedance: 50 Ohm(Note) If specular reflective mode is selected, then the default setting is plus or minus 4 V/F.S. |
| Vidutinis mėginių skaičius | OFF, 2 to 32,768 times (16 steps)(Note) These values can be set using the command input from external equipment via the compact console and RS-232C interface. |
| Vertinimo rezultatai (O1, O2) | Photo-MOS relay- Maximum load current: 50 mA- Applied voltage: 30 V DC or less (between judgment output and COM)- ON impedance: 35 Ohm or less- Operation time: Max. 2 ms |
| Indikatoriai: lazerio spinduliuotė | Green LED (lights up during laser emission from sensor head 1 or sensor head 2, or immediately before laser emission) |
| Temperatūros charakteristikos | plus or minus 0.01 % F.S./degrees |
| Laiko įvestis (lazerio emisija) | Laser emission stops or continues when voltage (using input voltage: 12 to 24 V DC, maximum input voltage: 30 V DC) is input or there is an open circuit: determined based on input mode selection. |
| Aliarmo išvestis: išvesties veikimas | Opened when the amount of light is excessive or insufficient. |
| Aliarmo išvestis: Apsauga nuo trumpojo jungimo | Incorporated |
| Atsparumas aplinkos poveikiui: aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Atsparumas aplinkos poveikiui: atsparumas smūgiams | 196 m/s2 (20 G approx.) in X, Y and Z directions for 3 times each |
| Vertinimo išvestys (O1, O2): išvesties veikimas | Opened or closed when the threshold value is reached. Determined based on judgment output mode selection. (The threshold value varies with the hysteresis setting.) |
| Atsparumas aplinkos poveikiui: aplinkos temperatūra | 0 to +50 degrees +32 to +122 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Atsparumas aplinkos poveikiui: atsparumas vibracijai | 10 to 55 Hz frequency (period: 1 min.) 0.75 mm 0.030 in amplitude in X,Y and Z directions for 30 min. each |
| Vertinimo rezultatai (O1, O2): panaudojimo kategorija | DC-12 or DC-13 |
| Vertinimo išėjimai (O1, O2): Apsauga nuo trumpojo jungimo | Incorporated |
Produkto aprašymas
More details
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
