Aptarnavimo laikas: pirmadieniais–penktadieniais 9:00–18:00
HVG-150-42B - HVG-150-42B MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 23.1-42V / 3.5A, 150.3W. IP67, ..
Sandėlyje Karštas produktas

HVG-150-42B

HVG-150-42B MEANWELL AC-DC Single output LED driver Mix mode (CV+CC), Output 23.1-42V / 3.5A, 150.3W. IP67, ..

$0.00 JAV dolerių
4517 sandėlyje
Pagrindinės specifikacijos
Vardas: HVG-150-42B
Valstija: Recommended Model
Formatas: Box
Serija: HVG-150-B
Tiekėjo informacija
MEANWELL
MEANWELL
Produktai: 6448
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba

Techninės specifikacijos

Parametras Vertė
Vardas HVG-150-42B
Valstija Recommended Model
Formatas Box
Serija HVG-150-B
Pritemdymas 0-10V, 1-10V, Resistance 0-100K, PWM Signal 10V
Patvirtinimai UL
Galia (W) 150,30
Subformatas IP67
Plotis (mm) 68.00
Aukštis (mm) 38.80
Kintamosios srovės įvesties maks. 528,00
Kintamosios srovės įvestis Min. 180,00
Paraiškos Lighting
Gamintojas MEAN WELL
Produkto tipas LED Driver
Izoliacija (V) 3.750,00
Didžiausia galia (W) 150.3
Įvesties jungtis Cable
Įvesties dažnis 50 Hz, 60 Hz
Ilgas/Fonas 245.00
Ilgas aprašymas LED driver dimmable with phase input.Specially designed for powering LEDs directly in a steady stream.Format in metal box sealedIP67.Input range180-528Vca47-63Hz.Output in constant current3,58 A.Range of output voltage with current mode constant23,1 to 42Vccaccording to demand load.Power:150,3 W.Efficiency typical:91%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10V,a PWM signal of 10V with a frequency of 100Hz to 3KHz or resistance of 0 to 100K Ohms. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class I with grounding.Factor corrector, power>0,98to 230vac at full load.Operating temperature range of caseTcfrom-40ºCup+85ºC.Dimensions (Length x Width x Height):245 x 68 x 38,8 mm5 years of warranty.Manufacturer: MEAN WELL.This source is designed to work directly with leds (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream.This source can operate in either Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.The series HVG are LED drivers, class I grounded.You can also work in voltage mode constant giving a fixed voltage of 42V if the load is powered at constant voltage and does not overcome the maximum output power.With metal housing IP67. The series HVG has a high efficiency designed for applications of public lighting, exterior, interior, or any application of LED lighting. Approved HL Class I Division 2 for ex-zones in the US. Complies with the requirements of security at the global level for lighting.Can be adjusted by regulatory assets or liabilities0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz or by resistance of 0 to 100KOhmios. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regulate the LED strips we recommend the series PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Some compatible models tested are:MEAN WELL DAP-04S01 (compatible with any push button normally open).SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver.
Išvesties jungtis Cable
Įėjimo tipas CA Three-phase
Garantija (metais) 5,00
Kilmės šalis China
Išėjimo srovė mA 3500, 4000
Minimalios išėjimo srovės intensyvumas (mA) 3.580,00
Maksimalus išėjimo intensyvumas (mA) 3.580,00

Produkto aprašymas

More details
Pagrindinės savybės
  • Pramoninės klasės kokybė
  • Atitinka RoHS reikalavimus
  • CE sertifikuotas
  • 1 metų garantija

Techninės detalės

LED driver dimmable with phase input.

Produkto dokumentai

Duomenų lapas

Techninės specifikacijos ir našumo duomenys

Vartotojo vadovas

Montavimo ir naudojimo vadovas

Top