| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Kabelis | Suitable for round cable φ9 to φ11 mmφ0.354 to φ0.433 in |
| Išvestis | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)PNP open-collector transistor- Maximum source current: 100 mA- Applied voltage: 30 V DC or less (between output and +V)- Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) |
| Svoris | Net weight: 85 g approx. |
| Išsami informacija | DC-voltage |
| Produktas | Adjustable Range Reflective Photoelectric Sensor |
| Medžiaga | Enclosure: ABSFront cover: PolycarbonateDisplay cover: Polycarbonate |
| Priedas | Adjusting screwdriver: 1 pc. |
| Histerezė | 10 % or less of operation distance(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm 7.874 x 7.874 in) as the object. |
| Apsauga | IP67 (IEC) |
| Dalies numeris | EQ-512 |
| Kabelio ilgis | Total length up to 100 m328.084 ftis possible with 0.3 mm2, or more, cabtyre cable. |
| Produkto pavadinimas | Adjustable Range Reflective Photoelectric Sensor EQ-500 |
| Jutimo režimas | Switchable either BGS or FGS function |
| Reakcijos laikas | 2 ms or less |
| Produkto numeris | EQ-512 |
| Maitinimo įtampa | 12 to 24 V DC ±10 % Ripple P-P 10 % or less |
| Laikmačio funkcija | - |
| Reguliuojamas diapazonas | 0.2 to 1.0 m0.656 to 3.281 ft(Note 1) The adjustable range stands for the maximum sensing range which can be set with the distance adjuster. The sensor can also detect an object 0.1 m0.328 ft, or more, away.(Note 2) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
| Aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Spinduliuojantis elementas | Infrared LED (Peak emission wavelength: 855 nm0.034 mil, modulated) |
| Atsparumas smūgiams | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Prijungimo būdas | Screw-on terminal connection |
| Atstumo reguliatorius | 2-turn mechanical adjuster with indicator |
| Priėmimo elementas | 2-segment photodiode |
| Aplinkos apšvietimas | Incandescent light: 3,000 Lx or less at the light-receiving face |
| Aplinkos temperatūra | –20 to +55 ℃–4 to +131℉(No dew condensation or icing allowed),Storage: –30 to +70 ℃–22 to +158℉ |
| Veikimo indikatorius | Orange LED (lights up when the output is ON) |
| Stabilumo indikatorius | Green LED (lights up under stable operating condition) |
| Atsparumas vibracijai | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Izoliacijos varža | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Išvestis: išvesties operacija | Switchable either Detection-ON or Detection-OFF |
| Įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Galia / Srovės suvartojimas | 45 mA or less |
| Atitiktis CE ženklinimo direktyvai | EMC Directive, RoHS Directive |
| Išėjimas: Apsauga nuo trumpojo jungimo | Incorporated |
| Automatinė trukdžių prevencijos funkcija | Incorporated(Note) Note that the detection may be unstable depending on the mounting conditions or the sensing object. In the state that this product is mounted, be sure to check the operation with the actual sensing object. |
| Jutimo diapazonas (esant maksimaliam nustatymo atstumui) | 0.1 to 1.0 m0.328 to 3.281 ft(Note) The adjustable range, sensing range and hysteresis are specified for white non-glossy paper (200 x 200 mm7.874 x 7.874 in) as the object. |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas