Sandėlyje Karštas produktas
UFX505C2
UFX505C2 FX-505-C2 PANASONIC Fiber amplifier, NPN, analogue output, double display
$0.00
JAV dolerių
4554 sandėlyje
Pagrindinės specifikacijos
Prekė:
Specifications
Kabelis:
0.2 mm26-core cabtyre cable, 2 m6.562 ftlong
Svoris:
Net weight: 60 g approx.Gross weight: 100 g approx.
Išsami informacija:
Cable type
Tiekėjo informacija
PANASONIC
Produktai: 4316
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Kabelis | 0.2 mm26-core cabtyre cable, 2 m6.562 ftlong |
| Svoris | Net weight: 60 g approx.Gross weight: 100 g approx. |
| Išsami informacija | Cable type |
| Produktas | Digital Fiber Sensor |
| Medžiaga | Enclosure, Case cover: PolycarbonateSwitch: Polyacetal |
| Priedas | FX-MB1 (Amplifier protection seal): 1 set |
| Apsauga | IP40 (IEC) |
| Dalies numeris | FX-505-C2 |
| Produkto pavadinimas | Digital Fiber Sensor FX-500 Ver.2 |
| Analoginis išėjimas | Output current: 4 to 20 mA approx. [H-SP, FAST STD: At 0 to 4,000 digits, LONG: At 0 to 8,000 digits (Note) ]Response time: 2 ms or lessZero point: Within 4 mA plus or minus 1 % F.S.Span: Within 16 mA plus or minus 5 % F.S.Linearity: Within plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm(Note) If display adjustment was conducted, it is not in this range. |
| Reakcijos laikas | H-SP: 25 micro s or lessFAST: 60 micro s or lessSTD: 250 micro s or lessLONG: 2 ms or lessU-LG: 4 ms or lessHYPR: 24 ms or less, selectable |
| Išorinė įvestis | NPN non-contact input- Signal conditionHigh: +8 V to +V DC or OpenLow: 0 to +1.2 V DC(at 0.5 mA source current)- Input impedance: 10 kOhm approx. |
| Produkto numeris | FX-505-C2 |
| Maitinimo įtampa | 12 to 24 V DC+10-15 % Ripple P-P 10 % or less |
| Laikmačio funkcija | Incorporated with variable OFF-delay / ON-delay /One-shot / ON-delay - OFF-delay / ON-delay - One-shot timer, switchable either effective or ineffectiveIncorporated with variable OFF-delay / ON-delay /One-shot timer, switchable either effective or ineffective |
| Kabelio prailginimas | Extension up to total 100 m328.084 ftis possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more) |
| Įvairūs nustatymai | Hysteresis setting / Shift amount setting / Emission power setting / Display turning setting / ECO setting / Data bank loading saving setting / Copying setting / Code setting / Reset setting / Logical calculation setting / Threshold value tracking setting, etc. |
| Energijos suvartojimas | Normal operation: 960 mW or less (current consumption 40 mA or less at 24 V supply voltage, excluding analog output)ECO mode: 680 mW or less (current consumption 28 mA or less at 24 V supply voltage, excluding analog output) |
| 1 išėjimas, 2 išėjimas | NPN open-collector transistor- Maximum sink current: 50 mA (Note 1)- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (Note 2) (at maximum sink current)(Note 1) 50 mA max. if 5 or more standard types are connected together.(Note 2) 50 mA max. if 5 or more standard types are connected together. (25 mA in case of 2-output type and cable type) |
| Aplinkos temperatūra | -10 to +55 ℉+14 to +131 ℉[If 4 to 7 units are mounted in cascade: -10 to +50 ℉+14 to +122 ℉or if 8 to 12 units are mounted in cascade: -10 to +45 ℉+14 to +113 ℉] (No dew condensation or icing allowed), Storage: -20 to +70 ℉-4 to +158 ℉ |
| Jautrumo nustatymas | 2-point teaching / Limit teaching / Full-auto teaching / Manual adjustment |
| Laikmačio funkcija: Laikmačio periodas | Timer range ''ms'': 0.5 ms approx., 1 to 9,999 ms approx., 1 ms approx.Timer range ''sec.'': 0.5 s approx., 1 to 32 s approx., 1 s approx.Timer range ''1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., 0.1 ms approx.each output is set individually |
| Spinduliuojantis elementas (moduliuotas) | Red LED (Peak emission wavelength: 643 nm0.025 mil) |
| Atitiktis CE ženklinimo direktyvai | EMC Directive, RoHS Directive |
| Išmetamųjų teršalų kiekio nustatymo funkcija | Incorporated, 3 levels (each level 25 to 100 %) + Auto setting [1 level (25 to 100 %) when using H-SP mode] |
| Trikdžių prevencijos funkcija | Incorporated (Note) , selectable either automatic interference prevention or different frequency(Note) Number of sensor heads which is possible to be mounted closely in auto interference prevention function depends on response time as shown in table below.Number of sensor heads which is possible to be mounted closely in different frequency Interference prevention function is up to 3 units.- Number of sensor heads mountable closely (Unit: set)Response time: IP-1H-SP: 0FAST: 2STD: 4LONG: 8U-LG: 8HYPR: 12 |
| 1 išvestis, 2 išvestis: išvesties taškai | 2 points |
| Galima išorinio įvesties funkcija | Emission halt / Teaching (Full-auto, Limit, 2-point) / Logic operation setting / Copy lock / Display adjustment / Data bank load / Data bank save, selectable |
| 1 išėjimas, 2 išėjimas: išėjimo veikimas | Switchable either Light-ON or Dark-ON by L/D mode |
| Krintančios šviesos intensyvumo rodymo diapazonas | H-SP / FAST / STD: 0 to 4,000LONG: 0 to 8,000U-LG / HYPR: 0 to 9,999 |
| Išorinė įvestis (perjungiama su 2 išvestimi) | - |
| 1 išėjimas, 2 išėjimas: apsauga nuo trumpojo jungimo | Incorporated |
Produkto aprašymas
FX-500 F Amplifier. Optical, analog output, 2 NPN outputs, dual display, high sensitivity and detection distance, ultra-fast
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
