Sandėlyje Karštas produktas
UHGS1010AC
UHGS1010AC HG-S1010-AC PANASONIC HG-S Sensor for measurement by contact. Head sensor with pneumatic actuator..
$0.00
JAV dolerių
4292 sandėlyje
Pagrindinės specifikacijos
Prekė:
Specifications
Pastaba:
Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.
Insultas:
10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
Svoris:
Net weight: 80 g approx.
Tiekėjo informacija
PANASONIC
Produktai: 4316
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Pastaba | Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃+68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment. |
| Insultas | 10.5 mm0.413 inor more(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Svoris | Net weight: 80 g approx. |
| Išsami informacija | Air-driven type10 mm0.394 intype General purpose |
| Produktas | Contact-Type Digital Displacement Sensor |
| Medžiaga | Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM(Note) : The probe is also available as an option. |
| Priedas | Sensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc. |
| Rezoliucija | 0.5 μm0.02 mil |
| Dalies numeris | HG-S1010-AC |
| Produkto pavadinimas | Contact-Type Digital Displacement Sensor HG-S |
| Naudojamas skystis | Clean air (Dew point temperature: -10 ℃+14 ℉or less) |
| Mėginių ėmimo dažnis | 1 ms |
| Produkto numeris | HG-S1010-AC |
| Taikomas vamzdelis | Outside diameter: ø4 mmø0.157 in/ Inside diameter: ø2.5 mmø0.098 in |
| Matavimo jėga | ・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.・For the relationship between supplied air pressure and measuring force or between measuring force and pushed spindle position, see the figures below. For upward mount without a seal cap, subtract 0.2 N from the measuring force. For side mount, subtract 0.1 N from the measuring force. The following figures are only typical examples, and these relationships differ depending on the assembly accuracy of the product or the abrasion status of sealing materials. |
| Matavimo diapazonas | 10 mm0.394 in(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm0.004 inor more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point. |
| Įžeminimo metodas | Capacitor grounding |
| Taršos laipsnis | 2 |
| Karštojo keitimo funkcija | Incorporated |
| Eksploatavimo aukštis | 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Veikimo indikatorius | Equipped (2-color LED: Orange / Green) |
| Patarimo nuokrypio dydis | 35 μm1.378 mil(typical value) |
| Taikomas valdiklis | HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019. |
| Izoliacijos varža | 100 MΩ or more at 250 V DC |
| Atitiktis reglamentams | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Darbinio slėgio diapazonas | 0.14 to 0.16 MPaWith no seal cap mounted : 0.035 to 0.045 MPa |
| Indikacijos tikslumas (PP) | Full range: 2.0 μm0.079 milor lessLimited range: 1.0 μm0.039 milor less(any 60 μm2.362 mil) |
| Padėties nustatymo metodas | Optical absolute linear encoder method |
| Gebėjimas atsispirti spaudimui | 0.2 MPa |
| Atsparumas aplinkos poveikiui: apsauga | IP67 (IEC)With no seal cap mounted : -(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed. |
| Atsparumas aplinkos poveikiui: aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Atsparumas aplinkos poveikiui: atsparumas smūgiams | 1,960 m/s2acceleration in X, Y, and Z directions three times each |
| Atsparumas aplinkos poveikiui: aplinkos temperatūra | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +60 ℃-4 to +140 ℉ |
| Atsparumas aplinkos poveikiui: atsparumas vibracijai | 10 to 500 Hz frequency, 3 mm0.118 indouble amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each |
Produkto aprašymas
HG-S - Contact measurement sensor. Sensor head with pneumatic actuator. Resolution 0.5μm. Precision 2μm. Range 10mm
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
