| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Kabelis | 0.2 m0.656 ft4-core shielded cable with round connectors |
| Išsami informacija | Measurement width 10 mm0.394 in/ Slim type |
| Produktas | Sensor heads |
| Medžiaga | Case: Die-cast aluminum, Light emitting and light receiving surfaces: Glass |
| Tiesiškumas | ±0.12 % F.S. (Installation distance: 20 mm0.787 in)±0.28 % F.S. (Installation distance: 100 mm3.937 in)(Note)Indicates an error with the ideal straight line of digital measured values. |
| Grynasis svoris | Emitter: 30 g approx., Receiver: 25 g approx. |
| Dalies numeris | HG-T1110 |
| Šviesos šaltinis | Red semiconductor laser: Class 1 [IEC / EN / JIS / GB / KS / FDA](Note)This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| Produkto pavadinimas | Thru-beam Type Digital Displacement Sensor HG-T |
| Pakartojamumas | 1 μm0.039 mil(Installation distance: 20 mm0.787 in)2.5 μm0.098 mil(Installation distance: 100 mm3.937 in)5 μm0.197 mil(Installation distance: 500 mm19.685 in)(Note)This is the P-P value of digital measurement value with half shading at the middle position of the installation distance. |
| Produkto numeris | HG-T1110 |
| Įžeminimo metodas | Capacitor grounding |
| Taršos laipsnis | 2 |
| Matavimo plotis | 10 mm0.394 in |
| Eksploatavimo aukštis | 2,000 m6,561.68 ftor less(Note)Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
| Minimalus jutimo objektas | ø0.5 mmø0.020 in(Installation distance: 500 mm19.685 in)(Note)When the light is blocked at the center position of 500 mm19.685 ininstallation distance. |
| Veikimo indikatorius | Emitter : Laser radiation indicator (Green)Receiver : Judgment output indicator (Orange / Green) |
| Taikomas valdiklis | HG-TC101 (-P), HG-TC111 (-P), HG-TC113 |
| Įrengimo atstumas | 0 to 500 mm0 to 19.685 in |
| Atitiktis reglamentams | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA regulations |
| Padėties nustatymo metodas | CMOS-based |
| Temperatūros charakteristikos | ±0.03 % F.S./℃(Note)When the light is half-blocked at the center position of 100 mm3.937 ininstallation distance. |
| Atsparumas aplinkos poveikiui: apsauga | IP67 (IEC) (Excluding connectors) |
| Atsparumas aplinkos poveikiui: aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Atsparumas aplinkos poveikiui: atsparumas smūgiams | 196 m/s2acceleration in X, Y and Z directions three times each |
| Atsparumas aplinkos poveikiui: aplinkos apšvietimas | Incandescent light: 5,000 ℓx or less at the light-receiving face(Note)When the sampling cycle of the controller is set to "standard sampling". |
| Atsparumas aplinkos poveikiui: aplinkos temperatūra | -10 to +45 ℃+14 to +113 ℉(No dew condensation or icing allowed), Storage: -20 to +60 ℃-4 to +140 ℉ |
| Atsparumas aplinkos poveikiui: atsparumas vibracijai | 10 to 55 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Atsparumas aplinkai: izoliacijos varža | 20 MΩ or higher, using 250 V DC megger (between all terminals and case) |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas