Aptarnavimo laikas: pirmadieniais–penktadieniais 9:00–18:00
UHGTC113 - UHGTC113 HG-TC113 PANASONIC HG-T Laser Displacement Sensor. Slave controller for wiring saving.
Sandėlyje Karštas produktas

UHGTC113

UHGTC113 HG-TC113 PANASONIC HG-T Laser Displacement Sensor. Slave controller for wiring saving.

$0.00 JAV dolerių
3545 sandėlyje
Pagrindinės specifikacijos
: When communication unitis connected
Prekė: Specifications
Kabelis: 0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong
Išsami informacija: Slave unit / Wire-saving type
Tiekėjo informacija
PANASONIC
PANASONIC
Produktai: 4316
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba

Techninės specifikacijos

Parametras Vertė
When communication unitis connected
Prekė Specifications
Kabelis 0.2 mm22-core (brown and blue lead wires) / 0.15 mm27-core composite cable, 2 m6.562 ftlong
Išsami informacija Slave unit / Wire-saving type
Produktas Controller
Medžiaga Case: Polycarbonate, Cover: Polycarbonate, Switches: Polyacetal
Grynasis svoris 60 g approx.
Dalies numeris HG-TC113
1–7 vienetai 1 to 6 units
Produkto pavadinimas Thru-beam Type Digital Displacement Sensor HG-T
8–15 vienetų 7 to 14 units
Rodymo diapazonas -199.999 to 199.999 mm-7.874 to 7.874 in
Mėginių ėmimo dažnis 1 ms (standard sampling) / 0.5 ms (high-speed sampling)
Produkto numeris HG-TC113
Maitinimo įtampa 24 V DC ±10 %, including ripple 0.5 V (P-P)
Taršos laipsnis 2
Ekrano raiška 1 μm0.039 mil
Eksploatavimo aukštis 2,000 m6561.68 ftor less(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
Srovės suvartojimas 100 mA or less (when sensor head is connected)(Note) : Current consumption does not include analog current output.
Atitiktis reglamentams CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Taikoma jutiklio galvutė HG-T1010、HG-T1110
Vidutinis skaičius (atsako laikas) 1 time (2 ms), 2 times (3 ms), 4 times (5 ms), 8 times (9 ms), 16 times (17 ms), 32 times (33 ms), 64 times (65 ms), 128 times (129 ms), 256 times (257 ms), 512 times (513 ms), and 1,024 times (1,025 ms) switching type(Note) : Average count (response time) is for when the sampling cycle is set to 1 ms (standard sampling). Response times differ when the sampling cycle is set to 0.5 ms (high-speed sampling).
Prijungtų pavaldžių įrenginių skaičius Maximum sink current and sourcecurrent of control output
Atsparumas aplinkos poveikiui: apsauga IP40(IEC)
Maksimalus prijungiamų valdiklių skaičius Up to 15 slave units can be connected to a master unit.(Note) : When connected to a communication unit for digital displacement sensor, up to 14 slave units can be connected per master unit.
Atsparumas aplinkos poveikiui: aplinkos drėgmė 35 to 85 % RH, Storage: 35 to 85 % RH
Atsparumas aplinkos poveikiui: atsparumas smūgiams 98m/s2acceleration (10 G approx.) in X, Y and Z directions five times each
Atsparumas aplinkos poveikiui: aplinkos temperatūra -10 to +50 ℃+14 to +122 ℉(No dew condensation or icing allowed) (Note), Storage: -20 to +60 ℃-4 to +140 ℉(Note) : When slave units are connected to the master unit, the maximum sink current / source current of control output and ambient temperature vary depending on the number of connected slave units as shown below.Number of connected slave unitsMaximum sink current and sourcecurrent of control outputAmbient temperatureWhen communication unitis connected1 to 7 units1 to 6 units20 mA-10~+45℃+14 to +113 ℉8 to 15 units7 to 14 units10 mA
Atsparumas aplinkos poveikiui: atsparumas vibracijai 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude (10 to 58 Hz), Maximum acceleration 49 m/s2(58 to 150 Hz) in X, Y and Z directions for two hours each
Atsparumas aplinkai: izoliacijos varža 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Atsparumas aplinkai: įtampos atsparumas 1,000 V AC for one minute between all supply terminals connected together and enclosure

Produkto aprašymas

HG-TC113_Controller_Thru-beam Type Digital Displacement Sensor HG-T_Slave unit / Wire-saving type
Pagrindinės savybės
  • Pramoninės klasės kokybė
  • Atitinka RoHS reikalavimus
  • CE sertifikuotas
  • 1 metų garantija

Produkto dokumentai

Duomenų lapas

Techninės specifikacijos ir našumo duomenys

Vartotojo vadovas

Montavimo ir naudojimo vadovas

Top