| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Tipas | Standard type |
| Kabelis | 0.1mm210-core cabtyre cable, 5 m16.404 ftlong |
| Pastaba | Where measurement conditions have not been specified precisely, the conditions used were as follows: supply voltage 24 V DC, ambient temperature +20 ℃+68 ℉, sampling rate 500 μs, average number of samples: 1024, measurement center distance, object measured is made of white ceramic and analog measurement values. |
| Svoris | Net weight: 70 g approx. (not including cable), 320 g approx. (including cable)Gross weight: 380 g approx. |
| Išsami informacija | Sensor head (Standard type) |
| Produktas | Compact Laser Displacement Sensor |
| Medžiaga | Enclosure: PBTFront cover: AcrylicCable: PVC |
| Priedas | Warning label: 1 set |
| Tiesiškumas | ± 0.1 % F.S. |
| Rezoliucija | 0.5 μm0.020 mil |
| Kelios įvesties | Zero set, zero set off, reset, memory switching, teaching, saving, and laser control according to the input time.In case NPN output is selected, Function varies according to the time 0 V is connected NPN.In case PNP output is selected, Function varies according to the time external power + is connected. |
| Dalies numeris | HL-G103-A-C5 |
| Šviesos šaltinis | Red semiconductor laser, Class 2 (IEC / EN / JIS / GB / KS / FDA (Note:This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3.Max. output: 1 mW (Peak emission wavelength: 655 nm0.026 mil) |
| Produkto pavadinimas | Compact Laser Displacement Sensor HL-G1 |
| Laiko įvestis | NPN output operates when 0V is connected and NPN is set. (It depends on the setting.)PNP output operates when external power + is connected and PNP is set. (It depends on the setting.) |
| Sijos skersmuo | 0.1 × 0.1 mm0.004 × 0.004 in(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2(13.5 %) of the center light intensity. Ifthere is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than thesensing point itself, then the results may be affected. |
| Mėginių ėmimo dažnis | 200 μs, 500 μs, 1 ms, 2 ms |
| Produkto numeris | HL-G103-A-C5 |
| Maitinimo įtampa | 24 V DC ± 10 % including ripple 0.5 V (P-P) |
| Skaitmeninis ekranas | Red LED 5 digit display |
| Matavimo diapazonas | ± 4 mm± 0.157 in |
| Indikatorius: Signalizacija | Orange LED lights up when this product cannot measure because of insuffienct or excessive light intensity. |
| Priėmimo elementas | CMOS image sensor |
| Eksploatavimo aukštis | 2,000 m6561 ftor less |
| Srovės suvartojimas | 100 mA or less |
| Taršos laipsnis | 2 |
| Izoliacijos varža | 20 MOhm , or more, with 250 V DC between all supply teminals connected together and enclosure |
| Atitiktis reglamentams | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
| Analoginė išvestis: srovė | Output range: 3.2 to 20.8 mA (normal), 21.6 mA (alarm)Load impedance: 300 Ω or less |
| Analoginis išėjimas: Įtampa | Output range: 0 to +10.5 V (normal), 11 V (alarm)Output impedance: 100 Ohm |
| Įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Indikatorius: lazerio spinduliuotė | Green LED (lights up during laser emission) |
| Matavimo centro atstumas | 30 mm1.181 in |
| Temperatūros charakteristikos | ± 0.08 % F.S. / ℃ |
| Indikatorius: Matavimo diapazonas | Three yellow LED |
| Išėjimo poliškumo nustatymo įvestis | NPN open collector output operates when 0 V is connected.PNP open collector output operates when 24 V DC is connected. |
| Išėjimai (OUT 1, OUT 2, OUT 3) | Judgment output or alarm output (Setting can be selected.)Selectable NPN transistor open-collector or PNP transistor open-collector<In case of using NPN output>-Maximum sink current: 50 mA-Applied voltage: 3 to 24 V DC (between output and 0 V)-Residual voltage: 2 V or less (at 50 mA of sink current)<In case of using PNP output>-Maximum source current: 50 mA-Residual voltage: 2.8 V or less (at 50 mA of source current) |
| Atsparumas aplinkos poveikiui: apsauga | IP67 |
| Atsparumas aplinkos poveikiui: aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Atsparumas aplinkos poveikiui: atsparumas smūgiams | 500 m/s2acceleration (50 G approx.) in X,Y and Z directions three times each |
| Atsparumas aplinkos poveikiui: aplinkos apšvietimas | Incandescent light: 3,000 liter x or less at the light-receiving face(Note) The fluctuation by ambient illuminance is ± 0.1 % F.S. or less. |
| Atsparumas aplinkos poveikiui: aplinkos temperatūra | -10 to +45 ℃+14 to +113 ℉(No dew condensation), Storage: -20 to +60 ℃-4 to +140 ℉ |
| Atsparumas aplinkos poveikiui: atsparumas vibracijai | 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm0.059 indouble amplitude in X,Y and Z directions for two hours each |
| Išėjimas (OUT 1, OUT 2, OUT 3): Išėjimo veikimas | Opened when the amount of light is insufficient. |
| Išėjimas (OUT 1, OUT 2, OUT 3): Apsauga nuo trumpojo jungimo | Incorporated (automatic restoration) |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas