Sandėlyje Karštas produktas
UHLT1010A
UHLT1010A HLT1010A HL-T1010A PANASONIC HL-T1 sensor heads, 10 mm type
$0.00
JAV dolerių
3682 sandėlyje
Pagrindinės specifikacijos
Prekė:
Specifications
Tipas:
Sensing width 10 mm0.394 intype
Kabelis:
0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong
Svoris:
Emitter: 30 g approx.Receiver: 20 g approx.
Tiekėjo informacija
PANASONIC
Produktai: 4316
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Tipas | Sensing width 10 mm0.394 intype |
| Kabelis | 0.09mm23-core shielded cable with connector, 0.5 m1.640 ftlong |
| Svoris | Emitter: 30 g approx.Receiver: 20 g approx. |
| Išsami informacija | Sensor head (Sensing width 10 mm0.394 intype) |
| Produktas | Ultra-compact Laser Collimated Beam Sensor |
| Medžiaga | Enclosure: PolyetherimideCase cover: PolycarbonateFront cover: Glass |
| Priedas | MS-LA3-1 (Sensor head mounting bracket): One set of two brackets for both the emitter and the receiverCN-HLT1-1 (Sensor head to controller connection cable): 1 cableLaser beam alignment sticker: 2 pcs.Label set (FDA regulations conformed type only): 1 set |
| Dalies numeris | HL-T1010A |
| Produkto pavadinimas | Ultra-compact Laser Collimated Beam Sensor HL-T1 |
| Jutimo diapazonas | ■■【In the case of(0 to 500 mm 0to 19.685 in)】■■Sensing width:ø1 mmø0.039 inMin. sensing object:ø8 micro mø0.315 milopaque objectRepeatability (During the state in which light is half blocked):4 micro m0.157 mil(Note：In case of an average sampling rate of 64 times.)Linear output resolution:4 micro m0.157 mil(Note) In case of an average sampling rate of 64 times.(Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width.(Note：This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mmø0.039 in.)■■【In the case of (500 to 2,000 mm19.685 to 78.74 in)】■■Sensing width:ø1 to ø2.5 mmø0.039 to ø0.098 inMin. sensing object:ø50 micro mø1.969 milopaque objectRepeatability (During the state in which light is half blocked): -Linear output resolution: -- |
| Produkto numeris | HL-T1010A |
| Kabelio prailginimas | Extension up to total 10 m32.808 ftis possible, with the optional cable. |
| Taršos laipsnis | 3 (industrial environment) |
| Išmetamųjų teršalų indikatorius | Green LED (lights up during laser emission) |
| Taikomas valdiklis | HL-AC1, HL-AC1P |
| Izoliacijos varža | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Atitiktis CE ženklinimo direktyvai | EMC Directive, RoHS Directive |
| Trikdžių prevencijos funkcija | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
| Atsparumas aplinkos poveikiui: aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Atsparumas aplinkos poveikiui: atsparumas smūgiams | 300 m/s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Atsparumas aplinkos poveikiui: aplinkos apšvietimas | Incandescent light: 10,000 liter x or less at the light-receiving face |
| Atsparumas aplinkos poveikiui: aplinkos temperatūra | 0 to +50 ℃+32 to +122 ℉(No dew condensation allowed), Storage: -25 to +65 ℃-13 to +149 ℉ |
| Atsparumas aplinkos poveikiui: atsparumas vibracijai | 10 to 500 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Spinduliuojantis elementas: FDA reglamentus atitinkantis tipas | Red semiconductor laser Class II (FDA)(modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil)(IEC / JIS: Class 1) |
| Spinduliuojantis elementas: IEC / JIS standartus atitinkantis tipas | Red semiconductor laser Class 1 (IEC / JIS)(modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm0.026 mil) |
Produkto aprašymas
HLT1 Series Analog Barrier Laser Emitter-Receiver, 10mm Beam Width, 500mm Range
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
