Sandėlyje Karštas produktas
ULS501C2
ULS501C2 LS-501-C2 PANASONIC Laser Amplifier (with display), cable type 2m, 2 outputs NPN + analog 4 to 20 mA
$0.00
JAV dolerių
3297 sandėlyje
Pagrindinės specifikacijos
Prekė:
Specifications
Kabelis:
0.2mm2 6-core cabtyre cable, 2 m 6.562 ft long
Svoris:
Net weight: 75 g approx.Gross weight: 110 g approx.
Išsami informacija:
Amplifiers(Cable type)
Tiekėjo informacija
PANASONIC
Produktai: 4316
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Kabelis | 0.2mm2 6-core cabtyre cable, 2 m 6.562 ft long |
| Svoris | Net weight: 75 g approx.Gross weight: 110 g approx. |
| Išsami informacija | Amplifiers(Cable type) |
| Produktas | Amplifier-separated Type Digital Laser Sensor |
| Medžiaga | Enclosure: PolycarbonateCover: PolycarbonateSwitch: Polyacetal |
| Priedas | FX-MB1 (Amplifier protective seal): 1 set |
| Apsauga | IP40(IEC) |
| Dalies numeris | LS-501-C2 |
| Produkto pavadinimas | Amplifier-separated Type Digital Laser Sensor LS-500 |
| Reakcijos laikas | H-SP: 60 micro s or less, FAST: 150 micro s or less, STD: 250 micro s or less, LONG: 500 micro s or less, U-LG: 5 ms or less, HYPR: 24 ms or less selectable |
| Išorinė įvestis | NPN non-contact input- Signal condition High: +8 V to +V DC or open, Low: 0 to +2 V DC (source current 0.5 mA or less)- Input impedance: 10 kOhm approx.(Note：Select either sensing output 2 or external input.) |
| Produkto numeris | LS-501-C2 |
| Maitinimo įtampa | 12 to 24 V DC +10-15% Ripple P-P 10 % or less |
| Laikmačio funkcija | OFF-delay timer, ON-delay timer, ONE-SHOT timer, ON / OFF-delay timer, ON-delay / ONE-SHOT timer,switchable either effective of ineffective, with variable timer periodOFF-delay timer, ON-delay timer, ONE-SHOT timer,switchable either effective of ineffective, with variable timer period |
| Kabelio prailginimas | Extension up to total 100 m 328.084 ft is possible with 0.3mm2, or more, cable. |
| Skaitmeninis ekranas | 8-digit 7-segment digital display (4-digit green LED + 4-digit red LED), MODE indicator (Yellow LED): L/D, CUST, PRO |
| Aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Atsparumas smūgiams | 98 m/s2acceleration (10 G approx.) in X, Y and Z directions for five times each |
| Loginis veiksmas | Between sensing output 1 and calculation target: Disabled / and / or / xor, selectableCalculation target: Sensing output 2 / adjacent upstream amplifier (sensing output 1) / external input, selectable |
| Energijos suvartojimas | Normal operation: 1,200 mW or less (Current consumption 50 mA or less at 24 V supply voltage,excluding monitor current output)ECO mode: 980 mW or less (Current consumption 40 mA or less at 24 V supply voltage,excluding monitor current output) |
| Aplinkos temperatūra | -10 to +55degrees + 14 to 131 degrees Fahrenheit (If 4 to 7 units are mounted close together, -10 to +50 degrees +14 to +122 degrees Fahrenheit ; if 8 to 12 units are mounted close together, -10 to +45 degrees +14 to +113 degrees Fahrenheit )(No dew condensation or icing allowed), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit |
| Veikimo indikatorius | Orange LED (lights up when sensing output 1 or sensing output 2 is ON) |
| Jautrumo nustatymas | 2-level teaching / limit teaching / full auto teaching / manual adjustment |
| Laikmačio funkcija: laikas | Timer range '' ms'': 0.5 ms approx., 1 to 9,999 ms approx., in approx. 1 ms intervalsTimer range '' sec'': 0.5 sec. approx., 1 to 32 sec. approx., in approx. 1 sec. intervalsTimer range '' 1/10 ms'': 0.05 ms approx., 0.1 to 999.9 ms approx., in approx. 0.1 ms intervals, Set separately for each output. |
| Atsparumas vibracijai | 10 to 150 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s2in X, Y, and Z direction for 2 hours each. |
| Izoliacijos varža | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Atitiktis reglamentams | EMC Directive, RoHS Directive |
| Stebėkite srovės išvestį | Output current: Approx. 4 to 20 mA (H-SP, FAST, STD: at 0 to 4,000 indication)Response time: 2 ms or lessZero point: 4 mA plus or minus 1 % F.S.Span: 16 mA plus or minus 5 % F.S.Linearity: plus or minus 3 % F.S.Load resistance: 0 to 250 Ohm |
| Išorinės įvesties funkcija | Laser emission halt / teaching (full-auto teaching, limit teaching, 2 point teaching) / logic operation setting / copy lock /display adjustment / data bank load / data bank save, selectable |
| Išvesties pasirinkimo indikatorius | Yellow LED (lights up when output is selected) |
| Lazerio emisijos indikatorius | Green LED (lights up during laser emission) |
| Įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Krintančios šviesos indikacijos diapazonas | H-SP/FAST/STD: 0 to 4,000LONG/U-LG/HYPR: 0 to 9,999 |
| Jutimo išėjimai (1, 2 jutimo išėjimas) | NPN open-collector transistor・Maximum sink current: 50 mA (Note：25 mA if 5 or more amplifier are connected in cascade (excluding cable extension).)・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at max. sink current)(Note：Select either sensing output 2 or external input as the connector type.) |
| Jutimo išvesties nustatymas: 1 jutimo išvestis | Normal mode, differential mode, hysteresis mode, window comparator mode, selectable |
| Jutimo išvesties nustatymas: Jutimo išvestis 2 | Normal mode, differential mode, hysteresis mode, self-diagnostic output mode, answer-back output mode, selectable(Note：Select either sensing output 2 or external input.) |
| Automatinė trukdžių prevencijos funkcija | Incorporated(Note：Number of units that can be mounted close together: 0 for H-SP; 2 for FAST; 4 for STD, LONG, U-LG, or HYPR) |
| Jutimo išėjimai (1, 2 jutimo išėjimai): išėjimo veikimas | Selectable either Light-ON or Dark-ON |
| Jutimo išėjimai (1, 2 jutimo išėjimas): Apsauga nuo trumpojo jungimo | Incorporated |
Produkto aprašymas
LS500. Laser Amplifier (with display), 2m cable, 2 NPN + analog outputs
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
