Sandėlyje Karštas produktas
ULSH201C5
ULSH201C5 LS-H201-C5 PANASONIC Sensor head, diffuse reflective, range 300mm, cable 5m
$0.00
JAV dolerių
4941 sandėlyje
Pagrindinės specifikacijos
Prekė:
Specifications
Kabelis:
0.09 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.)
Išsami informacija:
Sensor heads(Coaxial reflective type)
Produktas:
Amplifier-separated Type Digital Laser Sensor
Tiekėjo informacija
PANASONIC
Produktai: 4316
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Kabelis | 0.09 mm22-core two parallel shielded cables, 2 m 6.562 ft long(Note：Cable cannot be extended.) |
| Išsami informacija | Sensor heads(Coaxial reflective type) |
| Produktas | Amplifier-separated Type Digital Laser Sensor |
| Medžiaga | Enclosure: PBTIndicator cover: PolycarbonateBeam-emitting / receiving surfaces: Glass |
| Priedas | MS-LS-1 (Mounting bracket): 1pc. |
| Taško dydis | Approx. dia. 2 mm dia. 0.079 in or less (at a distance from the sensor head of 300 mm 11.811 in) |
| Apsauga | IP40 (IEC) |
| Dalies numeris | LS-H201-C5 |
| Produkto pavadinimas | Amplifier-separated Type Digital Laser Sensor LS-500 |
| Produkto numeris | LS-H201-C5 |
| Jutimo objektas | Opaque, translucent, or transparent object(Note：Make sure to confirm detection with an actual sensor before use.) |
| Aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Atsparumas smūgiams | 98 m / s2acceleration (10 G approx.) in X, Y and Z directions three times each |
| Jutimo diapazonas: HYPR | 750mm29.528 in(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Jutimo diapazonas: U-LG | 600mm23.622 in(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Aplinkos apšvietimas | Incandescent light: 3,000 ℓx or less at the light-receiving face |
| Aplinkos temperatūra | -10 to +55degrees + 14 to + 131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -20 to +70degrees -4 to +158 degrees Fahrenheit |
| Veikimo indikatorius | Orange LED (lights up when the amplifier output is ON) |
| Atsparumas vibracijai | 10 to 500 Hz frequency, 1.5 mm double amplitude or maximum acceleration 98 m/s2in X, Y, and Z direction for 2 hours each. |
| Taikomi stiprintuvai | LS-501(P), LS-501(P)-C2(Note：When using the thru-beam typeLS-H101□orLS-H102□, do not set the receiving light sensitivity (gctL) of the applicableLS-500series amplifier to level 2 or less. This is because there is a possibility of sensing becoming unstable.) |
| Spinduliuojantis elementas: Tipas | Red semiconductor laser diode |
| Izoliacijos varža | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Atitiktis reglamentams | EMC Directive, RoHS Directive |
| Jutimo diapazonas: STD režimas | 300mm11.811 in(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Jutimo diapazonas: FAST režimas | 200mm7.874 in(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Jutimo diapazonas: H-SP režimas | 150mm5.906 in(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Jutimo diapazonas: U-LG režimas | 450mm17.717 in(Note：The sensing range of the coaxial reflective type sensor is specified for white non-glossy paper (100 × 100 mm3.937 × 3.937 in) as the object.)(Note：The sensing ranges for coaxial retroreflective type sensors are values for the RF-330 reflector. In addition, the sensing range is the possible setting range for the reflector. The sensor can detect an object less than 0.01 m0.033 ftaway. Note that if there are white papers or specular objects near the sensor head, reflected light from these objects may be received. In such cases, use the amplifier unit’s receiving sensitivity function to lower the sensitivity, change the response time, or move the sensor head away from the target object. The incident light intensity may vary with the condition of the reflector surface. When using one of the applicableLS-500series amplifiers, leave an adequate safety margin when setting the threshold.) |
| Įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Spinduliuojantis elementas: lazerio klasė | Class 1 [IEC / EN / JIS / GB / KS / FDA](Note：This product complies with the FDA regulations (FDA 21 CFR 1040.10 and 1040.11) in accordance with FDA Laser Notice No. 56, except for complying with IEC 60825-1 Ed. 3. |
| Spinduliuojantis elementas: maks. išvestis | 2mW |
| Spinduliuojantis elementas: didžiausias emisijos bangos ilgis | 660 nm 0.026 mil |
Produkto aprašymas
LS500. Sensor head, diffuse reflection, range 750mm, cable 5m
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
