| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Kabelis | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Išvestis | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Svoris | Net weight: Emitter 80 g approx., Receiver 85 g approxGross Weight: 210 g approx. |
| Išsami informacija | NPN output |
| Produktas | Small / Slim Object Detection Area Sensor |
| Medžiaga | Enclosure: Heat-resistant ABSLens: AcrylicIndicator cover: Acrylic |
| Apsauga | IP62 (IEC) |
| Dalies numeris | NA1-11 |
| Produkto pavadinimas | Small / Slim Object Detection Area Sensor NA1-11 |
| Elemento žingsnis | 10 mm0.394 in |
| Reakcijos laikas | In Dark state: 5 ms or lessIn Light state: 10 ms or less |
| Jutimo diapazonas | 0.17 to 1 m0.558 to 3.281 ft(Note:The sensing range is the possible setting distance between the emitter and the receiver. The sensor can detect an object less than 0.17 m 0.558 ft away.) |
| Produkto numeris | NA1-11 |
| Jutimo aukštis | 100 mm3.937 in |
| Jutimo objektas | ø13.5 mmø0.531 inor more opaque object(Note:Although this product can detect slim objects by using the cross-beam scanning system, the size of the slim object which can be stably detected differs with the setting distance. When this sensor is used to detect slim objects, make sure to confirm stable detection using the actual objects.) |
| Maitinimo įtampa | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Kabelio prailginimas | Extension up to total 100 m 328.084 ft is possible, for both emitter and receiver, with 0.3 mm2, or more, cable. |
| Aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Spinduliuojantis elementas | Infrared LED (Peak emission wavelength: 880nm0.035mil, cross-beam scanning system) |
| Taršos laipsnis | 3 (Industrial environment) |
| Atsparumas smūgiams | 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each |
| Indikatoriai: emiteris | Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) |
| Aplinkos apšvietimas | Incandescent light: 3,000 lx or less at the light-receiving face |
| Aplinkos temperatūra | -10 to 55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Srovės suvartojimas | Emitter: 80 mA or lessReceiver: 100 mA or less |
| Indikatoriai: Imtuvas | Operation indicator: Orange LED (lights up when the output is ON)Power indicator: Green LED (lights up when the power is ON)Large indicator: Orange LED (lights up or blinks when the large indicator input is Low, lighting pattern is selected by operation mode switch) |
| Atsparumas vibracijai | 10 to 150 Hz frequency, 1.5 mm0.059 indouble amplitude in X, Y and Z directions for two hours each |
| Izoliacijos varža | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Išvestis: išvesties operacija | ON or OFF when beam channel is interrupted, selectable by operation mode switch |
| Įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Išvestis: panaudojimo kategorija | DC-12 or DC-13 |
| Atitiktis CE ženklinimo direktyvai | EMC Directive, RoHS Directive |
| Išėjimas: Apsauga nuo trumpojo jungimo | Incorporated |
| Spinduliuojančių / priimančių elementų skaičius | 11 Nos. each on the emitter and the receiver, respectively |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas