Sandėlyje Karštas produktas
UNA15-T
UNA15-T NA15 NA1-5 PANASONIC Area sensor, 0.2 to 3 m, 25 mm pitch, NPN, 12-24 V DC
$0.00
JAV dolerių
4975 sandėlyje
Pagrindinės specifikacijos
Prekė:
Specifications
Kabelis:
0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong
Išvestis:
NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current)
Svoris:
Net weight: Emitter 70 g approx., Receiver 80 g approx.Gross weight: 270 g approx.
Tiekėjo informacija
PANASONIC
Produktai: 4316
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Kabelis | 0.3 mm24-core (emitter: 3-core) oil resistant cabtyre cable, 2 m6.562 ftlong |
| Išvestis | NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 1 V or less (at 100 mA sink current), 0.4 V or less (at 16 mA sink current) |
| Svoris | Net weight: Emitter 70 g approx., Receiver 80 g approx.Gross weight: 270 g approx. |
| Išsami informacija | NPN output [Long sensing range type] |
| Produktas | Ultra-slim Body Picking Sensor |
| Medžiaga | Enclosure: Heat-resistant ABSLens cover: AcrylicIndicator cover: Acrylic |
| Sijos žingsnis | 25 mm0.984 in |
| Apsauga | IP62 (IEC) |
| Dalies numeris | NA1-5 |
| Produkto pavadinimas | Ultra-slim Body Picking Sensor NA1-PK5/NA1-5 |
| Reakcijos laikas | 10 ms or less (when the interference prevention is used, in Light state: 30 ms or less, in Dark state: 13 ms or less) |
| Jutimo diapazonas | 0.2 to 3 m0.656 to 9.843 ft(0.05 to 1 m0.164 to 3.281 ftwhen set to SHORT)(Note) The sensing range is the possible setting distance between the emitter and the receiver. |
| Produkto numeris | NA1-5 |
| Jutimo aukštis | 100 mm3.937 in |
| Jutimo objektas | ø35 mmø1.378 inor more opaque object(completely beam interrupted object) |
| Maitinimo įtampa | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| Kabelio prailginimas | Extension up to total 100 m328.084 ftis possible for both emitter and receiver with 0.3 mm2, or more, cable. |
| Aplinkos drėgmė | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Spinduliuojantis elementas | Infrared LED(Peak emission wavelength: 950 nm0.037 mil, synchronized scanning system) |
| Taršos laipsnis | 3 (Industrial environment) |
| Atsparumas smūgiams | 490 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| Energijos suvartojimas | Emitter: 0.5 W or lessReceiver: 0.8 W or less(Note) Obtain the current consumption by the following equation.Current consumption = Power consumption / Supply voltage(e.g.) When the supply voltage is 12 V, the current consumption of the emitter is0.5 W / 12 V ≈ 0.042 A = 42 mA |
| Indikatoriai: emiteris | Power indicator: Green LED (lights up when the power is ON)Job indicator: Orange LED (lights up or blinks when the job indicator input is Low, lighting pattern is selected by operation mode switch) |
| Aplinkos apšvietimas | Incandescent light: 3,000 lx or less at the light-receiving face |
| Aplinkos temperatūra | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed),Storage: -20 to +70 ℃-4 to +158 ℉ |
| Indikatoriai: Imtuvas | Operation indicator: Red LED (lights up when one or more beam channels are interrupted, but lights up when two beam channels or more are interrupted in the double-beaminterruption mode)Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)Job indicator: Orange LED (lights up or blinks when the job indicator input is Low, lighting pattern is selected by operation mode switch) |
| Atsparumas vibracijai | 10 to 150 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Izoliacijos varža | 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Spindulių kanalų skaičius | 5 beam channels |
| Išvestis: išvesties operacija | ON or OFF when one or more beam channels are interrupted / ON or OFF when two or more beam channels are interrupted, selectable by operation mode switch |
| Įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Išvestis: panaudojimo kategorija | DC-12 or DC-13 |
| Atitiktis CE ženklinimo direktyvai | EMC Directive, RoHS Directive |
| Išėjimas: Apsauga nuo trumpojo jungimo | Incorporated |
| Trikdžių prevencijos funkcija | Incorporated |
Produkto aprašymas
Area sensor, 5 beams, 0.2 to 3m, 25 mm beam spacing, NPN, 12-24 VDC
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
