| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| PFHD | 3.85 × 10-9(Note) Probability of dangerous failure per hour. |
| Kabelis | 0.16 mm25-core heat-resistant PVC cable, 3 m 9.842 ft long |
| MTTFD | 100 years or more(Note) Mean time to dangerous failure. |
| Išsami informacija | Hand protection type Min. sensing object ø25 mmø0.984 in(20 mm0.787 inbeam pitch) |
| Produktas | Ultra-slim Light Curtain [Type 2 PLc SIL1] |
| Medžiaga | Enclosure: Polycarbonate alloySensing surface: Polycarbonate alloyMS-SFC-1 (Standard mounting bracket): Stainless steel (SUS) |
| Sijos žingsnis | 20 mm0.787 in |
| Priedai | MS-SFC-1 (Standard mounting bracket): 1 setSF4C-TR25 (Test rod): 1 No. |
| Dalies numeris | SF2C-H24-P |
| Produkto pavadinimas | Ultra-slim Light Curtain [Type2 PLc SIL1] SF2C |
| Maitinimo įtampa | 24 V DC plus or minus 20 % Ripple P-P 10 % or less |
| Reakcijos laikas | OFF response: 20 ms or lessON response: 80 to 100 ms |
| Produkto numeris | SF2C-H24-P |
| Kabelio prailginimas | Extension up to total 50m is possible for 0.3mm2or more, cable |
| Veikimo diapazonas | 0.1 to 3 m0.328 to 9.843 ft |
| Spinduliuojantis elementas | Infrared LED (Peak emission wavelength: 850 nm0.034 mil) |
| Taršos laipsnis | 3 |
| Apsauginis aukštis | 480 mm18.898 in |
| Eksploatavimo aukštis | 2, 000 m6561.680 ftor less(Note) Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m. |
| Aplinkos apšvietimas | Incandescent light: 5,000 ℓx or less at the light-receiving face |
| Blokavimo išvestis (SSD) | - Maximum sink current: 60mA- Applied voltage: same as supply voltage (between the lockout output and +V)- Residual voltage: 2.5V or less (source current 60mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Minimalus jutimo objektas | ø25 mmø0.984 inopaque object |
| Testo įvesties funkcija | Incorporated |
| Valdymo išvestis (OSSD) | - Maximum source current: 200mA- Applied voltage: same as supply voltage (between the control output and +V)- Residual voltage: 2.5V or less (source current 200mA, when using 10m length cable)- Leakage current: 200micro A or less (power supply OFF condition)- Maximum load capacity: 2.2micro F (No load to maximum output current)- Load wiring resistance: 3Ω or less |
| Spindulių kanalų skaičius | 24 |
| Efektyvus diafragmos kampas | plus or minus 5℃ or less [for an operating range exceeding 3 m 9.843 ft (conforming to IEC 61496-2 / ANSI/UL 61496-2) ] |
| Taikomi standartai: Japonija | JIS B 9704-1 / 2 (Type 2), JIS B 9705-1 (Category 2), JIS C 0508-1 to 3 (SIL 1) |
| Taikomi standartai: Europa | EN 61496-1 (Type 2), EN ISO 13849-1:2015 (Category 2, PLc), EN 61508-1 to 3 (SIL 1), EN 55011, EN 50178, EN 61000-6-2(Note) Regarding EU Machinery Directive, a Notified Body, TÜV SÜD, has certified with the type examination certificate. |
| Trikdžių prevencijos funkcija | Incorporated |
| Taikomi standartai: Šiaurės Amerika | ANSI / UL 61496-1 / 2 (Type 2), ANSI / UL 508, CAN / CSA 61496-1 / 2 (Type 2), CAN / CSA C22.2 No.14, ANSI / RIA 15.06(Note) With regards to the standards in the US/Canada, a Notified Body, TÜV SÜD, has certified the CTÜVUS mark. |
| Blokavimo išvestis (SSD): veikimo režimas | ON during normal operation, OFF during lockout(Note) If the emitter enters a lockout state, and light from the emitter enters the receiver, lockout information will be transmitted and lockout output (SSD) will turn OFF. |
| Valdymo išvestis (OSSD): veikimo režimas | ON when all beam channels are received, OFF when one or more beam channels are interrupted (OFF also in case of any malfunction in the safety light curtain or the synchronization signal) |
| Didelė daugiafunkcinė indikatoriaus funkcija | Incorporated |
| Blokavimo išvestis (SSD): apsaugos grandinė | Incorporated |
| Valdymo išvestis (OSSD): apsaugos grandinė | Incorporated |
| Taikomi reglamentai ir sertifikatai | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety) Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification |
| Atsparumas aplinkai: aplinkos drėgmė | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Atsparumas aplinkai: atsparumas smūgiams | 300 m / s2acceleration (30 G approx.) in X, Y and Z directions three times each |
| Grynasis svoris (spinduolio ir imtuvo bendras svoris) | 520 g approx. |
| Taikomi standartai: tarptautinis standartas | IEC 61496-1 / 2 (Type 2), ISO 13849-1:2015 (Category 2, PLc), IEC 61508-1 to 3 (SIL 1) |
| Atsparumas aplinkai: aplinkos temperatūra | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: - 25 to +60 ℃- 13 to +140 ℉ |
| Atsparumas aplinkos poveikiui: apsaugos laipsnis | IP65, IP67 (IEC) |
| Atsparumas aplinkai: atsparumas vibracijai | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude in X, Y and Z directions for two hours each |
| Atsparumas aplinkai: izoliacijos varža | 20 MΩ , or more, with 500 V DC megger between all supply terminals connected together and enclosure |
| Atsparumas aplinkai: įtampos atsparumas | 1, 000 V AC for one min. between all supply terminals connected together and enclosure |
| Srovės suvartojimas: Užsidega didelis universalus indikatorius | Emitter: 45 mA or lessReceiver: 40 mA or less |
| Srovės suvartojimas: Dideli daugiafunkciai indikatoriai nedega | Emitter: 35 mA or lessReceiver: 35 mA or less |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas