Sandėlyje Karštas produktas
USFC21
USFC21 SF-C21 PANASONIC Safety control unit for safety light curtain and other safety products, 8 inputs 24V..
$0.00
JAV dolerių
4642 sandėlyje
Pagrindinės specifikacijos
Prekė:
Specifications
Svoris:
Net weight: 190 g approx.Gross weight: 320 g approx.
Produktas:
Safety Control Unit
Medžiaga:
Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate
Tiekėjo informacija
PANASONIC
Produktai: 4316
Paprastai išsiunčiama per 2–3 darbo dienas
Kokybės garantija
Greitas pristatymas
Techninė pagalba
Techninės specifikacijos
| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Svoris | Net weight: 190 g approx.Gross weight: 320 g approx. |
| Produktas | Safety Control Unit |
| Medžiaga | Main unit enclosure: Polycarbonate / ABS polymer alloyEnclosure: Polycarbonate |
| PFHD/MTTFD | 9.73 x 10−10/ 100 years or more |
| Dalies numeris | SF-C21 |
| Kabelio ilgis | 100 m328.084 ftor less |
| Produkto pavadinimas | Safety Control Unit SF-C21 |
| Produkto numeris | SF-C21 |
| Taršos laipsnis | 2 |
| Prijungimo būdas | Input / output and power supply: Detachable spring cage termina l blocksRS-485: Detachable spring-cage terminal blockUSB: Mini-B male |
| Susiję standartai | IEC 60947-1, IEC 60947-5-1, IEC 60947-5-2, IEC 60947-5-5, IEC 60947-5-8, IEC 61496-1, IEC TS 62046, ISO 13851 |
| Blokavimo funkcija | Incorporated |
| Eksploatavimo aukštis | 2,000 m6561.680 ftor less(Note) Do not use or store this device in a pressurized environment beyond the atmospheric pressure at sea level. |
| Atsparumas vibracijai | 5 to 8.4 Hz frequency, 3.5 mm0.138 inhalf amplitude, 8.4 to 150 Hz frequency, Max. acceleration 9.8 m/s2(1 G), in X, Y and Z directions for two hours each (IEC / EN 60068-2-6) |
| Loginio nustatymo funkcija | Input mode, control mode, output mode, reset mode, auxiliary ou tput mode |
| Viršįtampio kategorija | II |
| Nutildymo indikatoriaus išvestis | Semiconductor photo MOS relay output x 1- Maximum load current: 60 mA- Supply voltage: Same as the voltage of the power supply for internal- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| Blokavimo atleidimo funkcija | Incorporated |
| Loginio pasirinkimo funkcija | No.0: Customization controlNo.1: Overall stop controlNo.2: Parallel muting controlNo.3: Sequential muting controlNo.4: Partial stop control 1No.5: Partial stop control 2No.6: Two-hand controlNo.7: OR controlNo.8: Operation mode selection control |
| Saugos įvestis (IN1–IN8) | 2 inputs x 4, Rated voltage: Same as the voltage of the power supply for internal |
| Taikomi standartai: EMC | IEC 61000-6-2, IEC 61326-3-1, EN 55011 |
| Paleidimo laikas po įjungimo | 2 sec. or less |
| Taikomi standartai: Sauga | IEC 61508-1 to 3, EN 61508-1 to 3 (SIL3), ISO 13849-1:2015 (Category 4, PLe), IEC 61131-2, IEC 61010-2-201, IEC 62061 (SILCL3), UL 61010-1, UL 61010-2-201, UL 1998 |
| Valdymo išėjimas (OUT1–OUT4) | PNP open-collector transistor with 2 outputs x 2- Maximum source current: 300 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| Ryšio funkcija (MODBUS RTU) | Interface: RS-485Protocol: MODBUS RTUMaximum transmission distance: 100 m328.084 ftMaximum number of units that can be connected: 8 units (slaves) |
| Išorinio įrenginio stebėjimo funkcija | Incorporated |
| Saugos įvestis (IN1–IN8): Įjungimo lygis | Input voltage: 18 VInput current: 3.5 mA |
| Nutildymo indikatoriaus išvestis: išvesties režimas | ON when muting / override |
| Saugos įvestis (IN1–IN8): IŠJUNGIMO lygis | Input voltage: 5 VInput current: 1.0 mA |
| Nutildymo indikatoriaus išvestis: Reakcijos laikas | 10 ms or less |
| Taikomi reglamentai ir sertifikatai | CE Marking (Machinery Directive, EMC Directive, RoHS Directive), UKCA Marking [Supply of Machinery (Safety)Regulations, EMC Regulations, RoHS Regulations], TÜV SÜD certification, Korea's Radio Waves Act conformity registration |
| Atsparumas aplinkai: aplinkos drėgmė | 30 to 85 % RH, Storage: 30 to 85 % RH |
| Atsparumas aplinkai: atsparumas smūgiams | 147 m/s2(15 G) 11 ms in X, Y and Z directions for three times each (IEC / EN 60068-2-27) |
| Maitinimo įtampa: Išorinio maitinimo šaltinis | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Maitinimo įtampa: Maitinimo šaltinis vidiniam | 24 V DC+10-15% Ripple P-P10 % or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Valdymo išvestis (OUT1–OUT4): išvesties režimas | True: ONFalse: OFF |
| Saugos įvestis (IN1–IN8): Įėjimo varža | 4.7 KΩ approx. |
| Atsparumas aplinkai: aplinkos temperatūra | -10 to +55 ℃+14 to +131 ℉(No dew condensation or icing allowed), Storage: -25 to +60 ℃-13 to +140 ℉ |
| Valdymo išėjimas (OUT1–OUT4): Reakcijos laikas | OFF response: 10 ms or lessON response: 100 ms or less |
| Atsparumas aplinkos poveikiui: apsaugos laipsnis | IP20 (IEC)(must be installed in a control panel with protectio n IP54 or higher) |
| Atsparumas aplinkai: izoliacijos varža | 20 MΩ, or more, with 500 V DC megger(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| Srovės suvartojimas: Išorinio maitinimo šaltinis | 100 mA or less(Note) "Power supply for external" is the power supply for control output / auxiliary output. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Srovės suvartojimas: Maitinimo šaltinis vidiniam | 200 mA or less(Note) "Power supply for internal" is the power supply for safety input. The power supplies for internal and external are insulated.(Note) The power supply unit connected to this device must satisfy the conditions below.- Output voltage within 20.4 V to 26.4 V DC (Ripple P-P: 10 % or less.)- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Directive and Low-voltage Directive (In case CE Marking conformity is required.)- Power supply unit conforming to the Low-voltage Directive and with an output of 100 VA or less- Power supply unit SELV (safety extra low voltage) / PELV (protected extra low voltage) conforming to the EMC Regulations and Low-voltage Regulations (In case UKCA Marking conformity is required.)- Power supply unit with an output holding time of 20 ms or more.- Power supply unit corresponding to CLASS 2 (In case C-TÜV US Listing Mark conformity is required.) |
| Saugos įvestis (IN1–IN8): vardinė įvesties srovė | 5 mA approx. |
| Pagalbinis išėjimas (AUX1–AUX4) (nesauginis išėjimas) | PNP open-collector transistor with 1 output x 4- Maximum source current: 60 mA / output- Applied voltage: Same as the voltage of the power supply for external- Residual voltage: 2.5 V or less- Leakage current: 100 μA or less (Including power supply OFF condition) |
| Valdymo išėjimas (OUT1–OUT4): Įjungimo uždelsimo funkcija | Incorporated |
| Atsparumas aplinkai: įtampos atsparumas | 1,000 V AC for one min.(All inputs connected together - USB port, all inputs connected together - RS-485 port, USB port - RS-485 port, between all supply terminals connected together and enclosure, all outputs connected together - all input connected together, all outputs connected together - USB port, all outputs connected together - RS-485 port) |
| Valdymo išėjimas (OUT1–OUT4): išjungimo uždelsimo funkcija | Incorporated |
| Nutildymo indikatoriaus išvestis: Apsauga nuo trumpojo jungimo | Incorporated |
| Valdymo išėjimas (OUT1–OUT4): Apsauga nuo trumpojo jungimo | Incorporated |
| Saugos įvestis (IN1–IN8): aptinkamos įjungimo būsenos trukmė | 10 ms or more |
| Saugos įvestis (IN1–IN8): neaptinkamos išjungimo būsenos trukmė | 0.7 ms or less |
| Pagalbinis išėjimas (AUX1–AUX4) (nesauginis išėjimas): atsako laikas | 10 ms or less |
| Pagalbinis išėjimas (AUX1–AUX4) (nesauginis išėjimas): apsauga nuo trumpojo jungimo | Incorporated |
| Pagalbinė išvestis (AUX1–AUX4) (nesauginė išvestis): išvesties režimas (gamykliniai nustatymai) | AUX1: Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)AUX2: Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)AUX3: Reset trigger output (ON under reset release wait condition)AUX4: Lockout output (OFF when lockout) |
| Pagalbinis išėjimas (AUX1–AUX4) (nesauginis išėjimas): išėjimo režimas (bet kurį iš pagalbinių išėjimų galima pritaikyti naudojant programinę įrangą) | Negative logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is OFF)Negative logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is OFF)Positive logic of OUT1 / OUT2 (ON when OUT1 / OUT2 is ON)Positive logic of OUT3 / OUT4 (ON when OUT3 / OUT4 is ON)Outputs A, B, C, and D of diagnosis results of input blocks (ON when logic is true)Outputs E, F, and G of internal logic circuit diagnostic results (ON when logic is true)Reset trigger output (ON under reset release wait condition)Lockout output (OFF when lockout)Muting indicator output (ON when muting / override)Monitor output in response to IN1 to IN8 (ON when input)No output (normally OFF) |
Produkto aprašymas
Control unit for barriers and other safety products, Cat. 4(Ple) and SIL3, 4 inputs, 2 outputs, 8 pre-established logics according to cat regulations. 4 (Ple) and 1 customizable logic, self-diagnostic
Pagrindinės savybės
- Pramoninės klasės kokybė
- Atitinka RoHS reikalavimus
- CE sertifikuotas
- 1 metų garantija
Produkto dokumentai
Duomenų lapas
Techninės specifikacijos ir našumo duomenys
Vartotojo vadovas
Montavimo ir naudojimo vadovas
