| Parametras | Vertė |
|---|---|
| Prekė | Specifications |
| Kabelis | Shielded cable with connector, 1 m3.281 ftlong |
| Išsami informacija | Sensor head |
| Produktas | Compact Type 4 Safety Beam Sensor |
| Medžiaga | Enclosure: PBT (Polybutylene terephthalate)Lens: AcrylicIndicator cover: Acrylic |
| Dalies numeris | ST4-A1-J1 |
| Produkto pavadinimas | Compact Type 4 Safety Beam Sensor ST4 |
| Maitinimo įtampa | Supplied from controller |
| Produkto numeris | ST4-A1-J1 |
| Jutimo objektas | φ9 mmφ0.354 inor more opaque object |
| Kabelio prailginimas | Extention up to total 50 m164.042 ftis possible for both emitter and receiver with exclusive cable. |
| Veikimo diapazonas | 0.1 to 15 m0.328 to 49.213 ft(Note:The operating range is the possible setting distance between the emitter and the receiver. It can detect sensing object of less than 0.1 m 0.328 ft away.) |
| Spinduliuojantis elementas | Infrared LED (Peak emission wavelength: 870 nm0.034 mil) |
| Aplinkos apšvietimas | Incandescent lamp: 3,500 Lx or less at the light-receiving face |
| Srovės suvartojimas | Emitter: 11 mA or lessReceiver: 9 mA or less |
| Taikomi standartai | IEC 61496-1/2 (JIS B 9704-1/2 / UL 61496-1/2) (Type 4), ISO 13849-1:2015 (Category 4, PLe), JIS B 9705-1 (Category 4), IEC 61508-1 to 3 (SIL3), IEC 62061 (SIL3), JIS C 0508-1 to 3 (SIL3), UL 1998, OSHA 1910.212, OSHA 1910.217 (C), ANSI B11.1 to B11.19, ANSI/RIA R15.06, ANSI/ISA S84.01 (SIL3)(Note) Complies with those standards only when the sensor head is used in combination with the controller ST4-C11 / ST4-C12EX. |
| Spindulio emisijos indikatorius | Green LED (lights up during beam emission, lights off during emission halt) |
| Efektyvus diafragmos kampas | plus or minus 2.5degrees or less for operating range exceeding 3 m 9.843 ft (required by IEC 61496-2 / UL 61496-2) |
| Spindulio pertraukimo indikatorius | Red LED (lights up when the beam is interrupted or lock out, lights off during reception)(Note) Shows light interruption information between the emitter and the receiver with the same address. It does not show OSSD output. |
| Stabilaus krintančio spindulio indikatorius | Green LED (lights up under stable light received condition, lights off under unstable light received condition) |
| Atitiktis CE ženklinimo direktyvai | Machinery Directive, EMC Directive, RoHS Directive |
| Svoris (bendras siųstuvo ir imtuvo svoris) | Net weight: 100 g approx.Gross weight: 140 g approx. |
| Atsparumas aplinkai: aplinkos drėgmė | 30 to 85 % RH, Storage: 30 to 95 % RH |
| Atsparumas aplinkai: atsparumas smūgiams | 300 m/s2acceleration in X, Y and Z directions three times each |
| Atsparumas aplinkai: aplinkos temperatūra | -10 to +55 ℃+14 to +131℉(No dew condensation or icing allowed),Storage: -25 to +70 ℃-13 to +158℉ |
| Atsparumas aplinkos poveikiui: apsaugos laipsnis | IP67 (IEC) |
| Atsparumas aplinkai: atsparumas vibracijai | 10 to 55 Hz frequency, 0.75 mm0.030 indouble amplitude or maximum acceleration 90 m/s2 in X, Y and Z directions for two hours each< |
| Atsparumas aplinkai: izoliacijos varža | 20 MOhm or more with 500V DC megger between all supply terminals connected together and enclosure |
| Atsparumas aplinkai: įtampos atsparumas | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Techninės specifikacijos ir našumo duomenys
Montavimo ir naudojimo vadovas